HD540PRO Specs
Model HD540Pro
Structure layout Six axis rotor system
Maximum wheelbase 2100mm
Dimensions
length x width x height
2145mm×2045mm×865m（Arms deployed, propellers folded）
1138mm×682 mm×865mm（Arms folded）
Spraying tank 40L
Spreading tank 60L
Tank installation method Plug-in
Empty mass (including
batteries) 47.5KG
Battery 30000mAh
Battery weight 13.3KG
Battery installation Plug-in
nozzle type Centrifugal nozzle
Machine rated working
pressure 0.3-0.4Mpa
Number of main rotors 6
Number of nozzles Centrifugal nozzle 4
Liquid pump type Diaphragm pump
Liquid pump flow Centrifugal: 13L/min
Operation spray width
11 meters (operating height 3.5 meters ± 0.5 meters,
flight speed 3m/s)
FPV camera front, rear
Flight parameters
Hover Accuracy:
Spray full load hover 8.5min
Spread full load hover 7min
no-load hovering time 21min
RTK: horizontal ±10cm, vertical ±10cm
Radar: ±0.1m
Ground imitation radar
ranging accuracy 0.1m
Fixed height range 1-30m
Obstacle avoidance
perception range 1-30m
Obstacle avoidance radar
maximum pitch angle:
15° Motor rated power 2000w*6piece
Remote control signal distance ≤2000m
Altitude limit ≤30m
Flight speed limit ≤10m/
Super Fast Dual Battery Charger
Charges battery from 30% to 90% in about 12 Minutes
Charges with 110v or 220v
Charging voltage: 78.3V
Charging current: 94A
Battery capacity: 30000mAh
Single cell voltage: 3.8V
Number of battery cells: 18
Battery voltage: 68.4V
Charging temperature: 5-65°C / Discharging temperature: -20~60°C
Battery weight: 13.3KG
Battery installation method: quick swap battery
RTK Module
Increase Satellite range and position accuracy. Connections remote to drone and produces centimeter-level positioning.
Recomended Generator Specs
Peak Wattage 13,000
Running Wattage 10,500
Running Amperage at 120V 87.5
Running Amperage at 240V 43.75
Runtime at 25% Load 17
Runtime at 50% Load 8
Engine Manufacturer DuroMax Power
Engine Type 4-Stroke
Valve Type OHV
Engine Cooling Type Forced Air
Engine Size 500cc
Engine Speed 3600 RPM
Starting Type Push Button
Electric Start Yes
Recoil Start Yes
Idle Control No Load Low Idle
Fuel Delivery System Carburetor
Fuel Types Gasoline
Oil Cooling Type Splash
Recommended Oil 10W-30
Recommended Oil Types Blended, Conventional, or Synthetic
Oil Capacity 40.5 fluid oz
Automatic Low Oil Shutdown Yes
Cast Iron Sleeve Yes
Bearing Type Stainless Steel Ball Bearing
EPA Certified Yes
CARB Certified Yes
50 State Emissions Yes